Nonmetallic Surface Adhesive & Screw Magnetic Mount
Nonmetallic Surface Adhesive & Screw Magnetic Mount
Nonmetallic Surface Adhesive & Screw Magnetic Mount
Nonmetallic Surface Adhesive and Screw Magnetic Mount
  • Nonmetallic Surface Adhesive & Screw Magnetic Mount
  • Nonmetallic Surface Adhesive & Screw Magnetic Mount
  • Nonmetallic Surface Adhesive & Screw Magnetic Mount
  • Nonmetallic Surface Adhesive & Screw Magnetic Mount
  • Nonmetallic Surface Adhesive and Screw Magnetic Mount

Nonmetallic Surface Adhesive & Screw Magnetic Mount

(54 customer reviews)

$16.99

Order today, estimated U.S. delivery by: 06/24/2024

  • Built-in neodymium rare earth magnet
  • 2.25″ diameter 3M foam Adhesive backing easily attaches to any flat surface, such as aluminum, fiberglass, plastic, rubber, wood, etc.
  • Use this mount to easily attach your device to your motorcycle/scooter, boat, kayak, atv, dashboard or any flat surface
  • Optional – included tapping screw to better secure mount to certain surfaces – M2.5 x 19.85mm
  • Built-in loop to attach device tether (sold separately)
  • Preferred mount for kayak and water navigation use
Compatible with both Elite™ and Micro™ devices

Customer Reviews

4.96 out of 5

54 global ratings

Let us know what you think...

Review this product

Ask a question

Share your thoughts with other customers

Review this product

Ask a question

Share your thoughts with other customers

Read reviews that mention

kayak water mount helmet

Customer Reviews

  1. BlueKnight1600 (verified owner)

    VERY Bright, but compact and LONG battery life....

    BlueKnight1600 (verified owner)

    As a retired LEO, and member of a law enforcement motorcycle club, we do a lot of group rides, charity runs, and even funeral escorts. I bought 6 of these units, and mounted them on various, non-painted, high visibility parts of my bike, because, I believe, you can’t have too many lights on a motorcycle, when safety is a major concern. The day I bought my first 2 units, I tested them by running them for 13 straight hours, in the fully lit configuration. After 13 hours, they were still running bright. I ran them all day, on my dining room table, until I went to bed at night. They have never gone dead on me yet. I just recharge them before each use, just to top off the charge. I also charged them 2 years ago, and didn’t use them at all last year, because of the virus, and 2 years later, they still have their full charge. And the true beauty of them is that there is no wiring, no permanent mounting. When I’m done with the run, I simply take them off, and stow them in my tail pack. Smaller than a pack of cigarettes, you can stick them in your pocket, if you choose. And the variety of different mounts is endless. I bought the rubber, magnetic mounts, with the 3M adhesive, that once you put them on, they’re not going anywhere. And the magnet strength on these units, and their mounts, is EXTREMELY strong…there is NO WAY these are blowing off the bike, until you pull them off, and you feel the strength of the magnet when you pull them off. I also bought the arm strap magnetic mounts as well, and just like their many other other mounts, the magnets are rock solid, and going nowhere. Waterproof, and flashing from ALL sides (beside the bottom, where it mounts), the added safety, and visibility, goes without saying. My only little gripe is that I bought a set of 6 Elite Series units, but had to go online to buy a carry case for the units, the extra mounts and instructions. My only suggestion to GA is to offer a hard case, with foam interior, for easy, protective, long term storage, or just for stowing in your pack, or patrol bag. Also a good place for GA to advertise is on the case. But these lights are great. However, they are much more effective at night, than in the daytime, but I use them on day runs anyway, when riding in large groups. The flashing lights are still and attention-getter, as opposed to having none at all. A definite thumbs-up on these cool safety devices….

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. John J Wirth (verified owner)

    Strong connection

    John J Wirth (verified owner)

    The mount works great. I attached mine to the bow of my native kayak. I did swap the provided screw with a stainless bolt and locking nut that would connect through the deck for extra security. The magnets hold super well and I have no fear of loosing my GA to waves that hit the bow

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  3. Martin Allen (verified owner)

    Perfect for where ever you need it.

    Martin Allen (verified owner)

    Great product and went onto helmet perfectly. Adhesive really did the job and fastened well. Highly recommended if you need to put one on a construction helmet, Motorcycle helmet, or in my case, bicycle helmet. Very impressed with this product and may buy more to keep on hand.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  4. Jeffrey Yekel (verified owner)

    The performance of the device

    Jeffrey Yekel (verified owner)

    I wasn’t to sure of how the device would work. But I have to say I am very impressed of how well the device works. It works great and would recommend it to anyone. The lights are very bright.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  5. Alan Robidoux (verified owner)

    worth the extra money

    Alan Robidoux (verified owner)

    if you purchase any of guardian angel devices these things are a must, it seems like it will stick to any surface and hold then securely.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  6. Brian Heinz (verified owner)

    Perfect for Dash

    Brian Heinz (verified owner)

    This makes it super easy to place your light on a dashboard for a blinking warning light. Very strong magnet

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  7. John VanCamp (verified owner)

    Vary useful for dashboard warning

    John VanCamp (verified owner)

    I use this on my dashboard for extra warning if needed it’s durable and I recommend getting one

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  8. C Siano (verified owner)

    Perfect for mounting to a plastic or other non-magnetic surface.

    C Siano (verified owner)

    This mount comes with a strong 3M adhesive pre-applied to the back. A single mounting screw can also be used down the middle. While the mount is a flexible rubber like material, it contains a powerful magnet so that once your light is attached, it isn’t going anywhere. The slots fit the cross pattern on the larger GA devices to prevent them from pivoting. This mount works well to attach the GA device to the plastic housing on my Snow Machine. The GA device is fantastic for aiming to the rear when I’m last in line. Far more visible than the taillight.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  9. GARY M YARBRO (verified owner)

    Beats drilling holes and wiring up your Kayak

    GARY M YARBRO (verified owner)

    This works great for attaching the Red / Green light to the kayak. Money well spent for the light/mount combo.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  10. J.B. Jones III (verified owner)

    A Must for attaching a light to your Yak

    J.B. Jones III (verified owner)

    I got one to put on the front of my Kayak. It was easy to mount and works great with any of the Safety Lights. Again, I can not say it enough; it was easy to install and start using right away. I use it with the Red/Green Wearable Safety Light as Navigation lights in the early morning fog in Tampa Bay when on the rivers and flats. Gr8 solution for a Coast Guard requirement if one uses a motor with ones Yak. I have had no issues with said products and would recommend this a a simple solution to ones safety requirement.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  11. Matthew Satterlee-King (verified owner)

    Easy to install

    Matthew Satterlee-King (verified owner)

    I like that it was easy to install and very cost effective. I am a protection officer so I use my mount almost every night as do my crew.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  12. Don Roth (verified owner)

    Don Roth (verified owner)

    Great accessories for my kayak l love it and great safety accessories

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  13. R. Jay Phelps (verified owner)

    Great tool

    R. Jay Phelps (verified owner)

    Have used it on my vehicle several times while running my K9 and it has assisted greatly

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  14. jo coelho (verified owner)

    Absolutely Greatest Safety Light

    jo coelho (verified owner)

    The only safety light you’d ever need. Used it after 2 days and you’d be surprised how many people slow down and move over…. absolutely love it !!!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  15. Jonathan Stewart (verified owner)

    Just what i needed

    Jonathan Stewart (verified owner)

    Work great on any surface. just clean it good before installing.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  16. Doug Wilson (verified owner)

    Perfect mount for my tailgate

    Doug Wilson (verified owner)

    The adhesive mount with screw is my ideal mount for my GA light. I use the light on this mount as a “chase light” on my truck when overlanding. Super strong magnet for light retention, I have never had an issue.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  17. Craig Collins (verified owner)

    Kayak application

    Craig Collins (verified owner)

    The base works great, on my kayak! I don’t like to travel with my bow light on. The plate makes installation and removal a snap. The marine light that I purchased at the same time gives me both vessel requirements and area lighting. I highly recommend the product for any small vessel.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  18. Curtis Hall (verified owner)

    Curtis Hall (verified owner)

    Solid wood surface mount with supplied screw. Super strong magnet just like any of the other mounts.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  19. Noman

    Kayak Ready

    Noman

    The base mount is perfect for the Wilderness Systems Commander!

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  20. Adam R Yeager (verified owner)

    Nonmetallic Surface Adhesive & Screw Magnetic Mount

    Adam R Yeager (verified owner)

    Great mount to use for a kayak. The Nonmetallic Surface Adhesive & Screw Magnetic Mount allows an easy way to attach the Guardian Angel Device to the front of my kayak when operating the kayak at night. I use this mount with the lanyard for extra security of my device.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  21. Mark Beckman (verified owner)

    Wonderful Costumer service

    Mark Beckman (verified owner)

    Had a problem with the kayak light mount the 3M backing came off send a message informing them of the issue the replied with great timing and apologized and sent me a brand new replacement.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  22. Jeffrey Jackson (verified owner)

    Jeffrey Jackson (verified owner)

    The surface mount is perfect for attaching the Guardian Device to the front of my Hobie Kayak. Definitely won’t lose this off the boat while out on the water.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  23. Charles Wilkerson Jr. (verified owner)

    Additional Mount

    Charles Wilkerson Jr. (verified owner)

    I bought this mount thinking I would need a better way to mount the Guardian Angle light to my kayak. The magnet was strong enough without having to use this. I will find a use for it on one of the older kayaks.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  24. Daniel Martin (verified owner)

    Haven’t used yet

    Daniel Martin (verified owner)

    This is the one mount that I have not gotten a chance to use yet. Just not sure what I want to mount it to yet. But the magnet holds strong like the others do

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  25. Kevin Brown (verified owner)

    Nice mount

    Kevin Brown (verified owner)

    Much better than the stock one which had to be in the hull to mount it, as this one can be mounted on top giving a stronger hold.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Register

A link to set a new password will be sent to your email address.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.


Distributor or dealer? Contact us to register a wholesale account with access to your pricing.

Continue as a Guest

Don't have an account? Sign Up